You could pay someone to install your water for gas system. There are hundreds of people around the world who are constructing and installing water energy systems, as well as driving “water cars” themselves. These people save gas, save money, get much better mileage, and enjoy smoother-running engines and greatly reduced emissions. And that’s why they are happy to do the same for you so you can save gas, save money, get much better mileage, and enjoy a smoother-running engine and reduced emissions.
Or you could do it yourself, in which case you would first get instructions, which are available on line. Then you would make a parts list and buy the parts from hardware and electronics stores. Third, you would construct the components of the water energy system, put them all together, and install the system, making all the necessary adjustments to it. You would now be the proud owner of a Water Hybrid Vehicle. And last, after picking up your jaw from the floor, where it has dropped in astonishment at your engine’s mileage and performance, you would become an advocate of water energy, as I have.
To really grasp the implications and possibilities here, we must first clean the carbon deposits out of our minds. Using water fuel is an approach to our cars and fuel that requires more participation from us. The whole water energy system consists of physical components PLUS your mind and attitudes about fuel consumption. To really optimize your water fuel system, you will also be using fuel warmer, some Kicker wires to improve the spark, Xylene to add to your gasoline, a low-friction synthetic motor oil, a couple bottles of fuel treatment to clean carbon deposits from old unburned fuel out of your engine, a MAP sensor enhancer to keep the car computer from over-correcting the fuel mix back to over-rich, tires that are always fully inflated, and a real-time mileage tracker so that you won’t have to use an entire tank of gas to know what mileage you are getting.
